Ir para o conteúdo principal

Samsung Galaxy Tab 4 10.1 Motherboard Replacement

O que você precisa

  1. Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Battery: passo 1, imagem 1 %32 Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Battery: passo 1, imagem 2 %32
    • Insert the wedge of the nylon spudger and slide it between the front and back panels until the back comes off.

  2. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 2, imagem 1 %32
    • Peel off the green tape that covers the connectors for the three black strips.

    • Use the tip of a spudger or your fingernail to flip up the small retaining flaps.

  3. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 3, imagem 1 %32
    • Use a Phillips #00 screwdriver to remove the four 3.2mm screws.

  4. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 4, imagem 1 %32
    • Detach the red, blue, and black cables by prying up on the white connector from the motherboard.

    • If using fingers instead, pull evenly on the full width of the cable so the wires are not overly strained.

    • If you pull too hard you can damage the connector on the circuit board. Use a spudger or tweezers to push down on the black connector on the board while gently prying the battery connector loose. The connector breaks VERY easily.

  5. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 5, imagem 1 %32
    • Use the nylon spudger to remove the battery by prying up on the edges.

  6. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 6, imagem 1 %32
    • Once the battery is loose, lift it out of the device.

  7. Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Motherboard: passo 7, imagem 1 %32 Samsung Galaxy Tab 4 10.1 Motherboard Replacement, Motherboard: passo 7, imagem 2 %32
    • Remove the two 2.7mm Phillips #00 screws from the motherboard.

  8. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 8, imagem 1 %32 Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 8, imagem 2 %32
    • Use the flat end of a spudger to pry up and disconnect the five press-fit connectors from the motherboard.

  9. Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 9, imagem 1 %32 Samsung Galaxy Tab 4 10.1 Motherboard Replacement: passo 9, imagem 2 %32
    • Use a spudger to pry up the motherboard, and remove it from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas executaram este guia.

Blake Klein

Membro desde: 01/29/17

70.510 Reputação

Autoria de 50 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 25

Duração total: 4,169