Skip to main content

Introdução

This guide will take you through the step-by-step process of removing and replacing the motherboard of a Samsung Galaxy Tab 3 8.0.

  1. Start out by separating the screen from the back cover using the larger plastic opening tool to pry them apart. Be careful when removing the screen as negligence can cause damage.
    • Start out by separating the screen from the back cover using the larger plastic opening tool to pry them apart.

    • Be careful when removing the screen as negligence can cause damage.

  2. Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands. Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands.
    • Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands.

  3. To remove the battery you must use something small, such as tweezers, to disconnect the battery from its port. Note: the connection lifts up to remove.
    • To remove the battery you must use something small, such as tweezers, to disconnect the battery from its port.

    • Note: the connection lifts up to remove.

  4. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  5. After the battery is disconnected, use the pulling tab to safely remove the battery.
    • After the battery is disconnected, use the pulling tab to safely remove the battery.

  6. Disconnect the relays attached to the motherboard. Disconnect the relays attached to the motherboard.
    • Disconnect the relays attached to the motherboard.

  7. Unscrew the 2.9mm screws from the speakers using a Phillips head #000 screwdriver,  then lift the speakers from the device. Unscrew the 2.9mm screws from the speakers using a Phillips head #000 screwdriver,  then lift the speakers from the device. Unscrew the 2.9mm screws from the speakers using a Phillips head #000 screwdriver,  then lift the speakers from the device.
    • Unscrew the 2.9mm screws from the speakers using a Phillips head #000 screwdriver, then lift the speakers from the device.

  8. Using a plastic remover tool, carefully unseat each of the electric leads plugged into the board. Using a plastic remover tool, carefully unseat each of the electric leads plugged into the board.
    • Using a plastic remover tool, carefully unseat each of the electric leads plugged into the board.

  9. Unscrew the 2.9mm Phillips #000 screw above the battery, and the three 2.9mm Phillips #000 screws to the right of the battery. Unscrew the 2.9mm Phillips #000 screw above the battery, and the three 2.9mm Phillips #000 screws to the right of the battery. Unscrew the 2.9mm Phillips #000 screw above the battery, and the three 2.9mm Phillips #000 screws to the right of the battery.
    • Unscrew the 2.9mm Phillips #000 screw above the battery, and the three 2.9mm Phillips #000 screws to the right of the battery.

  10. Carefully lift the board from the device. Carefully lift the board from the device.
    • Carefully lift the board from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

10 outras pessoas concluíram este guia.

Kyle Ballard

Membro desde: 22-09-2014

840 Reputation

2 Guias de autoria

Team

USF Tampa, Team 4-2, Brown Fall 2014 Membro de USF Tampa, Team 4-2, Brown Fall 2014

USFT-BROWN-F14S4G2

3 Membros

26 Guias de autoria

One Comment

Be sure to include screw lengths to the nearest mm on all repair guides.

Dan Brown - Responder

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 24

Past 30 Days: 89

All Time: 8,855