Ir para o conteúdo principal

Introdução

If your tablet has a broken touch screen glass (digitizer), LCD display or you want to chang the micro USB charging port, loudspeakers, audio jack connector, etc., with this guide we will help you to do it.


Vídeo de Apresentação

  1. Put the scotch tape in order not to scatter pieces of glass. Remove any memory card and SIM card (if the tablet is 3G version). Remove any memory card and SIM card (if the tablet is 3G version).
    • Put the scotch tape in order not to scatter pieces of glass.

    • Remove any memory card and SIM card (if the tablet is 3G version).

  2. Using plastic tools remove the back / battery cover. Be careful with the Power and Volume buttons. Be careful with the Power and Volume buttons.
    • Using plastic tools remove the back / battery cover.

    • Be careful with the Power and Volume buttons.

  3. Before doing anything, disconnect the battery.
    • Before doing anything, disconnect the battery.

  4. This step is only if you want to replace the micro USB port flex cable. Remove the two screws and disconnect the charging port flex cable from the main board. Use a plastic tool to unstick the flex cable from the middle frame.
    • This step is only if you want to replace the micro USB port flex cable.

    • Remove the two screws and disconnect the charging port flex cable from the main board.

    • Use a plastic tool to unstick the flex cable from the middle frame.

  5. This step is for only if you want to change the battery. The battery is stuck to the middle panel. Use the white sticker to remove it.
    • This step is for only if you want to change the battery.

    • The battery is stuck to the middle panel.

    • Use the white sticker to remove it.

  6. 2x loudspeackers Power & Volume buttons flex cable Audio jack flex cable
    • 2x loudspeackers

    • Power & Volume buttons flex cable

    • Audio jack flex cable

  7. Front camera Wi-Fi antenna
    • Front camera

    • Wi-Fi antenna

  8. Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier. Use a gloves to avoid any injurys from glass. Do not rush.
    • Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier.

    • Use a gloves to avoid any injurys from glass.

    • Do not rush.

  9. Beware for the menu buttons flex cable. Beware for the menu buttons flex cable. Beware for the menu buttons flex cable.
    • Beware for the menu buttons flex cable.

  10. Always test the new spare part before final installation. Always test the new spare part before final installation.
    • Always test the new spare part before final installation.

  11. Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat. If the adhesive tape is not in good condition you must install a new one. If the adhesive tape is not in good condition you must install a new one.
    • Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat.

    • If the adhesive tape is not in good condition you must install a new one.

  12. Start with reassembling. .
    • Start with reassembling.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully.

Conclusão

To reassemble your device, follow these instructions in reverse order.

15 outras pessoas concluíram este guia.

ZFix

Membro desde: 09-12-2013

167.744 Reputation

306 Guias de autoria

Team

Master Techs Membro de Master Techs

Community

290 Membros

827 Guias de autoria

Awesome guide, was so easy to replace complete LCD digitiser and glass all in one unit.

capinneemo - Responder

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 28

Past 30 Days: 147

All Time: 20,662