Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

  1. Remove back cover.
    • Remove back cover.

  2. Remove battery. If you have SIM card and SD card in, remove them by the way.
    • Remove battery. If you have SIM card and SD card in, remove them by the way.

  3. Open this cover and release the home button flex connector. Open this cover and release the home button flex connector.
    • Open this cover and release the home button flex connector.

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.
    • Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.

  6. Remove the LCD screen from rear case. Remove the LCD screen from rear case.
    • Remove the LCD screen from rear case.

  7. Remove all the screws. Remove all the screws.
    • Remove all the screws.

  8. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.
    • Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.

  9. Twist off these two screws and remove the whole motherboard assembly. Twist off these two screws and remove the whole motherboard assembly.
    • Twist off these two screws and remove the whole motherboard assembly.

  10. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally.
    • Release the connector,loose the assembly from adhesive and remove it finally.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Sophia

Membro desde: 25/03/2014

42.970 Reputação

62 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 4,804