Ir para o conteúdo principal

Introdução

Prereq guide only! Removes the top midframe, which includes the charging coil, for the Samsung Galaxy S10+.

  1. Remove the nine 4 mm Phillips screws securing the top midframe to the phone.
    • Remove the nine 4 mm Phillips screws securing the top midframe to the phone.

  2. The midframe is still held in place by a few plastic clips around the edge. Insert the point of a spudger into the notch on the right edge of the midframe, near the Bixby button.
    • The midframe is still held in place by a few plastic clips around the edge.

    • Insert the point of a spudger into the notch on the right edge of the midframe, near the Bixby button.

    • Pry up to loosen the midframe from the phone.

  3. Insert the point of a spudger into the notch on the left edge of the phone, located near the power button. Pry up to loosen the midframe from the phone.
    • Insert the point of a spudger into the notch on the left edge of the phone, located near the power button.

    • Pry up to loosen the midframe from the phone.

  4. Lift the midframe from the top corners and remove it from the phone.
Conclusão

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro desde: 03/01/2018

173.169 Reputação

428 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

138 Membros

17.014 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 72