Ir para o conteúdo principal

Samsung Galaxy S Blaze Volume Rocker Replacement

O que você precisa

  1. Samsung Galaxy S Blaze Volume Rocker  Replacement, Volume Rocker: passo 1, imagem 1 %32
    • Start by removing the back plate to expose the battery by pulling the back and front plates apart.

  2. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 2, imagem 1 %32
    • Remove the battery from the device and set aside.

  3. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 3, imagem 1 %32 Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 3, imagem 2 %32
    • Using a Phillips Head Screwdriver size 00. Remove all eight 4mm screws from the frame.

    • The eight screws are all the same size.

  4. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 4, imagem 1 %32
    • Remove the frame from the phone by prying it off with the iFixit blue plastic opening tool.

    • Work around the phone with the tool until the frame is off.

    • You may need to use a bit of force to pry off the frame.

  5. Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 5, imagem 1 %32 Samsung Galaxy S Blaze Volume Rocker  Replacement: passo 5, imagem 2 %32
    • The volume rocker is held into the frame by two small prongs.

    • Carefully unhook the prongs from the frame by pulling to the side and remove the volume rocker.

    • The prongs on the volume rocker look like this.

Conclusão

To reassemble your device, follow these instructions in reverse order.

If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting

Uma outra pessoa concluiu este guia.

Jake Best

Membro desde: 03/05/15

261 Reputação

Autoria de 2 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 13

Duração total: 296