Ir para o conteúdo principal

Introdução

Speaker replacement guide for a Samsung Galaxy J3 Emerge Model SM-J327P. The speaker needs replacing if the sounds are distorted when speaking on the phone or when music is playing.

  1. Heat up the edges of the screen with a hair dryer. Put the iFixit Opening Tool between the screen and body to  open the edge of the screen up. Work the iFixit Opening Tools around the whole screen to break the glue.
    • Heat up the edges of the screen with a hair dryer.

    • Put the iFixit Opening Tool between the screen and body to open the edge of the screen up.

    • Work the iFixit Opening Tools around the whole screen to break the glue.

  2. Lift the screen up from the bottom. The screen could crack when lifting it up.
    • Lift the screen up from the bottom.

    • The screen could crack when lifting it up.

    • Pry the gray cover open.

  3. Pry the connector off of the motherboard by using a clean nail or the iFixit opening tool. Pry the connector off of the motherboard by using a clean nail or the iFixit opening tool.
    • Pry the connector off of the motherboard by using a clean nail or the iFixit opening tool.

  4. Remove the eleven Phillips #00 3.5mm screws. If the screws get stuck when removing, try using tape to get them out. Place the adhesive side of tape on the screws and pull the tape off the spot.
    • Remove the eleven Phillips #00 3.5mm screws.

    • If the screws get stuck when removing, try using tape to get them out. Place the adhesive side of tape on the screws and pull the tape off the spot.

  5. Turn the phone over and push down where the battery was.
    • Turn the phone over and push down where the battery was.

    • There will be a loud clicking noise when applying pressure.

  6. Insert the iFixit Opening Pick between the motherboard and the panel.
    • Insert the iFixit Opening Pick between the motherboard and the panel.

    • Work the iFixit Opening Pick around the outside of the motherboard.

  7. Pry the motherboard away from the phone using your hand. Pry the motherboard away from the phone using your hand.
    • Pry the motherboard away from the phone using your hand.

  8. Use the iFixit Opening Pick to pry off the speaker from the back side. Pull out speaker with hands or use tweezers to pull out speaker.
    • Use the iFixit Opening Pick to pry off the speaker from the back side.

    • Pull out speaker with hands or use tweezers to pull out speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Hugh Cosculluela

Membro desde: 24/01/2019

507 Reputação

4 Guias de autoria

Equipe

Cal Poly, Team S19-G2, White Winter 2019 Membro de Cal Poly, Team S19-G2, White Winter 2019

CPSU-WHITE-W19S19G2

4 Membros

5 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 8

Duração total: 685