Pular para o conteúdo principal

Introdução

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.

Peças

Nenhum componente especificado.

    • Remove the back battery cover.

  1. Remove the phone's battery.
    • Remove the phone's battery.

  2. Remove six (4.28 x 1.25)mm screws.
    • Remove six (4.28 x 1.25)mm screws.

  3. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  4. Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

  5. Peel off the Identification sticker.
    • Peel off the Identification sticker.

  6. Peel the button sensor on the side of the motherboard off of the case.
    • Peel the button sensor on the side of the motherboard off of the case.

  7. Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
    • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

  8. Peel up the camera attachment.
    • Peel up the camera attachment.

  9. You will now be able to replace the Camera component with a new part.
    • You will now be able to replace the Camera component with a new part.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Michelle Haddock

Membro desde: 20-04-2011

38 reputação

3 Guias de autoria

Equipe

Cal Poly, Team 15-11, Regan Spring 2011 Membro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Membros

14 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,643