Introdução

If there are any issues connecting to the WiFi with the device that can not seem to fixed, this simple guide explains how to replace the module. The only tool required is a #1 Phillips head screwdriver.

Peças

Não são necessárias peças.

Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
  • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

  • Tilt the back of the top cover forward to remove from chassis.

Adicionar comentário

Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
  • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

Adicionar comentário

Disconnect the WiFi board cable connector from the main logic board
  • Disconnect the WiFi board cable connector from the main logic board

Adicionar comentário

Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.
  • Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.

  • Slightly tilt the WiFi module sideways to remove from chassis.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Louis McKean

Member since: 18-10-2017

501 reputação

5 Guides authored

Equipe

USF Tampa, Team S1-G21, Cagle Fall 2017 Membro de USF Tampa, Team S1-G21, Cagle Fall 2017

USFT-CAGLE-F17S1G21

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 8

Todo: 45