Introdução

A guide on how to replace a damaged DC power board on a Samsung BD-7500.

Peças

Não são necessárias peças.

Remove the three 10mm screws with a Phillips #0 screwdriver.
  • Remove the three 10mm screws with a Phillips #0 screwdriver.

  • Pry the top off with a plastic opening tool.

Adicionar comentário

Remove the three screws holding down the cover with a Phillips #0 screwdriver.
  • Remove the three screws holding down the cover with a Phillips #0 screwdriver.

Adicionar comentário

Lift up the power cord at its base to remove it.
  • Lift up the power cord at its base to remove it.

Adicionar comentário

Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.
  • Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.

Adicionar comentário

Remove the 7mm screw with a Phillips #1 screwdriver.
  • Remove the 7mm screw with a Phillips #1 screwdriver.

  • Grip the blue tab attached to the base and pull upwards.

Adicionar comentário

Grip the edges of the motherboard and pull upwards to remove.
  • Grip the edges of the motherboard and pull upwards to remove.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

samer odeh

Member since: 13-02-2018

313 reputação

Autoria de 1 guia

Equipe

USF Tampa, Team S16-G4, Boczar Spring 2018 Membro de USF Tampa, Team S16-G4, Boczar Spring 2018

USFT-BOCZAR-S18S16G4

4 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 34