Introdução

The back speaker emits noise for your phone's ringtones, music, sound effects, and speakerphone conversations. Installing a new back speaker may alleviate distorted or missing noise.

Peças

Não são necessárias peças.

To remove the back casing, firmly press down and push towards the bottom of the phone.
  • To remove the back casing, firmly press down and push towards the bottom of the phone.

Adicionar comentário

With the casing removed, lift the battery from the indicated indentation.
  • With the casing removed, lift the battery from the indicated indentation.

Adicionar comentário

  • From here, you can now access the SIM card and model/serial numbers.

Adicionar comentário

  • Using the Phillips #00 screwdriver, remove the four indicated screws (4.5 mm).

Adicionar comentário

  • Press the pointed edge of the spudger into the side of the two rubber plugs in order to lift and remove them from the top of the phone.

  • Then, using the Phillips #00 screwdriver, remove the two indicated Phillip screws (6.5 mm).

Adicionar comentário

  • To remove the SIM card, start by pressing the top of the card and push down and away towards the bottom of the phone. Then, as indicated, pull the SIM card out.

Adicionar comentário

  • Begin to slowly lift the back casing of the phone. You should hear a snap when the casing is released.

  • The power, volume, and camera buttons may fall out when separating the front and back casing.

Adicionar comentário

  • Your casing should be separated and the three loose buttons put to the side.

  • Be aware of the wiring on the top of the phone. Make sure not to pull it apart when separating the case.

Adicionar comentário

  • Slowly remove the back casing by gently pulling the ribbon connection.

Adicionar comentário

  • Gently pull on the wires to remove the front casing.

Adicionar comentário

  • Your front casing and front speaker are now released.

Adicionar comentário

  • Locate the back speaker.

Adicionar comentário

  • Use the flat edge of the spudger to gently pry and remove the speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Breanne

Member since: 12-04-2012

187 reputação

5 Guides authored

Equipe

Cal Poly, Team 6-24, Amido Spring 2012 Membro de Cal Poly, Team 6-24, Amido Spring 2012

CPSU-AMIDO-S12S6G24

3 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 767