Ir para o conteúdo principal

Introdução

Prereq-only guide to prepare the MiTM Air Compressors AM1PH6508HD 2012 for service.

  1. Before you begin, make sure the device is powered down and cool to the touch. Flip the engine switch into the OFF position.
    • Before you begin, make sure the device is powered down and cool to the touch.

    • Flip the engine switch into the OFF position.

  2. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  3. Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor. Ensure the tank is completely depressurized before starting repairs.
    • Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor.

    • Ensure the tank is completely depressurized before starting repairs.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kyle Smith

Membro desde: 01/02/2021

17.702 Reputação

80 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

140 Membros

17.046 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 14