Introdução

This guide will be showing step-by-step instructions on how to get to and replace the motor of the airsoft gun.

  1. Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.
    • Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.

      • Slide the cover off.

    Adicionar comentário

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Pull the motor out from the inside of the hand grip.
    • Pull the motor out from the inside of the hand grip.

    • Using a soldering iron and desoldering wick, desolder the wires from the motor.

    Adicionar comentário

    • Using a soldering iron, solder the wires onto the new motor.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anika Morris

Member since: 05-10-2012

1 reputação

4 Guides authored

Equipe

Cal Poly, Team 18-41, Regan Fall 2012 Membro de Cal Poly, Team 18-41, Regan Fall 2012

CPSU-REGAN-F12S18G41

6 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 604