Ryobi P202 Right Side Case Replacement

Introdução

This guide covers the removal process of the outer case. The process does not require removing any of the internal electronics; however it is recommended that the battery is removed in order to reduce the risk of shock. The screws in the case are standard Torx T10 screws. It is advisable to have some place safe to keep all of the screws so that the case can be properly secured during reassembly.

O que você precisa

Passo 1 Battery

Ryobi P202 Right Side Case Replacement, Battery: passo 1, imagem 1 %32

Ryobi P202 Right Side Case Replacement, Battery: passo 1, imagem 2 %32

Ryobi P202 Right Side Case Replacement, Battery: passo 1, imagem 3 %32

The battery can shock you. Only touch plastic, non-conductive components.
Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

Editar

Passo 2 Right Side Case

Ryobi P202 Right Side Case Replacement, Right Side Case: passo 2, imagem 1 %32

Ryobi P202 Right Side Case Replacement, Right Side Case: passo 2, imagem 2 %32

Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.

Editar

Passo 3

Gently lift the casing from the drill body.
Take the casing completely off the drill body to gain access to the interior of the drill.
The Ryobi P202 casing has Part #: 200690001