Ir para o conteúdo principal

Roller Skate Double Action Cushion Replacement

O que você precisa

  1. Roller Skate Double Action Cushion Replacement, Sure-Grip Double Action Cushion: passo 1, imagem 1 %32
    • Using a 14 mm wrench, loosen and extract the bolt from the base plate.

  2. Roller Skate Double Action Cushion Replacement: passo 2, imagem 1 %32
    • Once the bolt is no longer in the base plate, lift and twist the entire truck assembly from the skate.

  3. Roller Skate Double Action Cushion Replacement: passo 3, imagem 1 %32 Roller Skate Double Action Cushion Replacement: passo 3, imagem 2 %32
    • Flip the truck over and remove the nut from the truck assembly bolt.

  4. Roller Skate Double Action Cushion Replacement: passo 4, imagem 1 %32 Roller Skate Double Action Cushion Replacement: passo 4, imagem 2 %32
    • Remove both sets of cushions and retaining washers from the bolt.

  5. Roller Skate Double Action Cushion Replacement: passo 5, imagem 1 %32 Roller Skate Double Action Cushion Replacement: passo 5, imagem 2 %32 Roller Skate Double Action Cushion Replacement: passo 5, imagem 3 %32
    • Remove the retaining washer from each cushion.

    • Use a spudger if the washer and cushion are difficult to separate.

    • Replace worn cushions and washers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jen Rushing

Membro desde: 05/24/15

1 Reputação

Autoria de 1 guia

Equipe

CCNTH Repair Project Membro de CCNTH Repair Project

Community

Membros da 2

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 7

Últimos 30 dias: 18

Duração total: 2,094