Conserte seus objetos Comunidade Loja

Roconia Q6 Fan Replacement

Introdução

In this guide, we'll walk you through the simple steps of replacing the fan in the Roconia Q6. With just a few basic tools and a little know-how, you can ensure your Roconia Q6 continues to operate smoothly and efficiently.

O que você precisa

  1. Roconia Q6 Fan Replacement, Top Cover: passo 1, imagem 1 %32 Roconia Q6 Fan Replacement, Top Cover: passo 1, imagem 2 %32

    • Flip your device upside down so that the interface is facing downwards.

    Editar

  2. Roconia Q6 Fan Replacement: passo 2, imagem 1 %32 Roconia Q6 Fan Replacement: passo 2, imagem 2 %32 Roconia Q6 Fan Replacement: passo 2, imagem 3 %32

    • The device is supported by rubber pieces located at the bottom extremities.

    • There are screws beneath the rubber pieces that can be removed. Remove all four 1.1 mm Phillips #1 screws by using the Phillips #0 screwdriver.

    Editar

  3. Roconia Q6 Fan Replacement: passo 3, imagem 1 %32 Roconia Q6 Fan Replacement: passo 3, imagem 2 %32 Roconia Q6 Fan Replacement: passo 3, imagem 3 %32

    • Turn device over again and pry open the device to remove the cover.

    Editar

  5. Roconia Q6 Fan Replacement: passo 4, imagem 1 %32 Roconia Q6 Fan Replacement: passo 4, imagem 2 %32 Roconia Q6 Fan Replacement: passo 4, imagem 3 %32

    • Pull out the cable that is connected to the top cover to fully separate.

    Editar

  6. Roconia Q6 Fan Replacement, Fan: passo 5, imagem 1 %32

    • Use the opening guide to open the device. Once open find the fan located in the back corner of the device

    Editar

  7. Roconia Q6 Fan Replacement: passo 6, imagem 1 %32

    • To remove the fan from its holder, simply pull it out.

    Editar

  8. Roconia Q6 Fan Replacement: passo 7, imagem 1 %32 Roconia Q6 Fan Replacement: passo 7, imagem 2 %32 Roconia Q6 Fan Replacement: passo 7, imagem 3 %32

    • Remove the sticker on the back of the fan to reveal soldered wires.

    • Using a soldering iron, desolder the wiring from the fan.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Axel

Membro desde: 02/08/24

97 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

University of North Texas, Team 4-4, Harold Spring 2024 Membro de University of North Texas, Team 4-4, Harold Spring 2024

UNT-HAROLD-S24S4G4

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 12

Duração total: 42