Conserte seus objetos Comunidade Loja

Rocketfish RF-WSP313 Speaker Replacement

Introdução

This guide will show you how to remove the components of the product necessary to access the bluetooth speaker, remove it, and replace it with a new one.

O que você precisa

  1. Rocketfish RF-WSP313 Speaker Replacement, Speaker: passo 1, imagem 1 %32

    • Using the metal spudger, remove the outer cap from the top of the device.

    Editar

  2. Rocketfish RF-WSP313 Speaker Replacement: passo 2, imagem 1 %32

    • Using a Phillips # 1 screwdriver, remove the four 1.1 cm flathead screws attaching the metal ring to the top of the device.

    Editar

  3. Rocketfish RF-WSP313 Speaker Replacement: passo 3, imagem 1 %32

    • Remove the ring and set aside.

    Editar

  4. Rocketfish RF-WSP313 Speaker Replacement: passo 4, imagem 1 %32

    • Using the metal spudger, remove the cap from the bottom of the device.

    Editar

  5. Rocketfish RF-WSP313 Speaker Replacement: passo 5, imagem 1 %32

    • Using a Phillips # 1 screwdriver, remove the four 1.1 sm screws attaching the metal ring to the bottom of the device.

    Editar

  7. Rocketfish RF-WSP313 Speaker Replacement: passo 6, imagem 1 %32

    • Remove the ring and set aside.

    Editar

  8. Rocketfish RF-WSP313 Speaker Replacement: passo 7, imagem 1 %32

    • Using a Phillips # 1 screwdriver, remove the four 1 cm screws from the outside panel. You will do this for each panel; it does not matter which side you start with.

    Editar

  9. Rocketfish RF-WSP313 Speaker Replacement: passo 8, imagem 1 %32

    • Using the metal spudger, pry off the side panel. Repeat this step on the other side panel.

    Editar

  10. Rocketfish RF-WSP313 Speaker Replacement: passo 9, imagem 1 %32

    • Using a Phillips #1 screwdriver, remove the four 1.1 cm flathead screws from the side of the device. Repeat this step on the other side of the device.

    Editar

  11. Rocketfish RF-WSP313 Speaker Replacement: passo 10, imagem 1 %32 Rocketfish RF-WSP313 Speaker Replacement: passo 10, imagem 2 %32

    • Using the metal spudger, open the device.

    Editar

  12. Rocketfish RF-WSP313 Speaker Replacement: passo 11, imagem 1 %32 Rocketfish RF-WSP313 Speaker Replacement: passo 11, imagem 2 %32

    • Using your fingers (or a pair of tweezers), disconnect the speaker cord from its socket.

    Editar

  13. Rocketfish RF-WSP313 Speaker Replacement: passo 12, imagem 1 %32

    • Using a Phillips #1 screwdriver, remove the four 1.2 cm pan head screws surrounding the speaker.

    Editar

  14. Rocketfish RF-WSP313 Speaker Replacement: passo 13, imagem 1 %32

    • Remove the speaker from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Kara Falknor

Membro desde: 01/25/17

101 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

Washington State, Team 1-50, Staggers Spring 2017 Membro de Washington State, Team 1-50, Staggers Spring 2017

WSU-STAGGERS-S17S1G50

Membros da 2

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 553