Introdução

In this guide, you will learn how to take apart the Ring Video Doorbell Pro.

  1. Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.
    • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

    Adicionar comentário

  2. Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.
    • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

    Adicionar comentário

    • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

    Adicionar comentário

    • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

    Adicionar comentário

    • Remove the front of the device from the back plate.

    Adicionar comentário

Conclusão

To reassemble your device, attach the new housing and follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Jake Dixon

Member since: 09-11-2017

626 reputação

4 Guides authored

Equipe

IUPUI, Team S7-G4, Baechle Fall 2017 Membro de IUPUI, Team S7-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G4

3 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 28

Últimos 30 dias: 133

Todo: 1,063