Ir para o conteúdo principal

Ring Stick Up Cam Camera Replacement

O que você precisa

  1. Ring Stick Up Cam Camera Replacement, Battery: passo 1, imagem 1 %32
    • Remove the six 6mm Phillips #00 screws from the back of the device.

  2. Ring Stick Up Cam Camera Replacement: passo 2, imagem 1 %32
    • Pry off the aluminum plate using a plastic opening tool.

  3. Ring Stick Up Cam Camera Replacement: passo 3, imagem 1 %32
    • Remove the two 6mm Phillips #00 screws that were under the aluminum plate.

  4. Ring Stick Up Cam Camera Replacement: passo 4, imagem 1 %32
    • Pry off the back cover using a plastic opening tool.

  5. Ring Stick Up Cam Camera Replacement: passo 5, imagem 1 %32
    • Disconnect the battery power leads using a plastic opening tool.

  6. Ring Stick Up Cam Camera Replacement: passo 6, imagem 1 %32
    • Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

  7. Ring Stick Up Cam Camera Replacement, Camera: passo 7, imagem 1 %32
    • Remove the three silver 6mm Phillips #00 screws holding the motherboard in the device.

  8. Ring Stick Up Cam Camera Replacement: passo 8, imagem 1 %32
    • Disconnect the ribbon connector shown in the photo.

  9. Ring Stick Up Cam Camera Replacement: passo 9, imagem 1 %32
    • Remove the motherboard from the device by hand.

  10. Ring Stick Up Cam Camera Replacement: passo 10, imagem 1 %32
    • Remove the two black 5mm Phillips #00 screws holding the camera board into the device.

    • Remove the single silver 10mm Phillips #00 screw holding the camera board into the device.

  11. Ring Stick Up Cam Camera Replacement: passo 11, imagem 1 %32
    • Remove the three plastic spacers shown in the photo by hand.

  12. Ring Stick Up Cam Camera Replacement: passo 12, imagem 1 %32
    • Carefully disconnect the camera board from the daughterboard by sliding a plastic opening tool between the camera board and the daughterboard.

  13. Ring Stick Up Cam Camera Replacement: passo 13, imagem 1 %32
    • Lift the camera board out of the housing using your hand.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ao Li

Membro desde: 02/06/19

245 Reputação

Autoria de 1 guia

Equipe

UC Davis, Team S18-G3, Lore Winter 2019 Membro de UC Davis, Team S18-G3, Lore Winter 2019

UCD-LORE-W19S18G3

Membros da 3

Autoria de 8 guias

2 comentários

Where can I purchase a new lens?

Javier Casas - Responder

Any ideas where to get a new lens?

Mete Doguoglu - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 7

Últimos 30 dias: 41

Duração total: 4,555