Pular para o conteúdo principal

Introdução

This process involves removing the back cover, the front cover, and the zoom mechanism of the camera. After, the lens cover can be removed from the front cover.

Peças

Nenhum componente especificado.

  1. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.
    • Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

  2. Loosen the back cover from both the left and the right sides of the camera. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.
    • Loosen the back cover from both the left and the right sides of the camera.

    • Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

  3. Open the film compartment. Press your finger on top of the grey latch on the left side of the camera. Press your finger on top of the grey latch on the left side of the camera.
    • Open the film compartment.

    • Press your finger on top of the grey latch on the left side of the camera.

  4. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  5. Removing the film compartment door is optional. However, it may aid maneuverability in future steps. Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place. Use your fingers to completely remove the metal pin.
    • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

    • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

    • Use your fingers to completely remove the metal pin.

    • Remove the film compartment door.

  6. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.
    • Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

  7. Loosen the front cover from the left and right sides of the camera. Remove the front cover. Remove the front cover.
    • Loosen the front cover from the left and right sides of the camera.

    • Remove the front cover.

  8. The lens cover is only attached to the front cover of the camera. Set the rest of the camera aside. In order to reach the lens cover, the zoom mechanism must be removed. Unscrew three screws from the front cover that hold the zoom mechanism in place.
    • The lens cover is only attached to the front cover of the camera. Set the rest of the camera aside.

    • In order to reach the lens cover, the zoom mechanism must be removed.

    • Unscrew three screws from the front cover that hold the zoom mechanism in place.

    • Remove the zoom mechanism.

  9. Unscrew the five screws that hold the lens cover plate and metal brace in place. Remove metal brace. Remove lens cover plate.
    • Unscrew the five screws that hold the lens cover plate and metal brace in place.

    • Remove metal brace.

    • Remove lens cover plate.

  10. To remove lens cover, push the lens cover from the outside of the front cover towards the inside of the front cover. Remove the lens cover.
    • To remove lens cover, push the lens cover from the outside of the front cover towards the inside of the front cover.

    • Remove the lens cover.

    • The metal arm attached to the lens cover is not securely attached and may fall off.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Eric Dazet

Membro desde: 10-04-2012

352 reputação

5 Guias de autoria

Equipe

Cal Poly, Team 6-21, Amido Spring 2012 Membro de Cal Poly, Team 6-21, Amido Spring 2012

CPSU-AMIDO-S12S6G21

4 Membros

14 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 152