Introdução

This guide will show the steps to remove the outer case for the Ricoh Theta S. Be aware that any replacement of disassembly of the original product may void the manufacturer warranty.

Peças

Não são necessárias peças.

Wedge the spudger underneath the small plastic square located on the bottom of the device.
  • Wedge the spudger underneath the small plastic square located on the bottom of the device.

  • Move the spudger to remove the plastic cover.

Adicionar comentário

Use a Phillips #00 screwdriver to remove the four 3-mm screws located on the bottom of the device. Use a Phillips #00 screwdriver to remove the four 3-mm screws located on the bottom of the device.
  • Use a Phillips #00 screwdriver to remove the four 3-mm screws located on the bottom of the device.

Adicionar comentário

Insert the plastic opening tool in between the panels shown. Apply pressure to unlatch the 9 spring clips located around the perimeter of the device. Lift the panel from the device.
  • Insert the plastic opening tool in between the panels shown.

  • Apply pressure to unlatch the 9 spring clips located around the perimeter of the device.

  • Lift the panel from the device.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Bradley Sutton

Member since: 07-11-2017

401 reputação

4 Guides authored

Equipe

IUPUI, Team S3-G1, Harley Fall 2017 Membro de IUPUI, Team S3-G1, Harley Fall 2017

IUPUI-HARLEY-F17S3G1

3 Membros

4 Guides authored

Where can find spare part case?

Thanks

Franco - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 25

Todo: 130