Conserte seus objetos Comunidade Loja

Revlon 473 Thermal Cutout Replacement

O que você precisa

  1. Revlon 473 Thermal Cutout Replacement, Shell: passo 1, imagem 1 %32

    • Before disassembly, make sure that the device is unplugged.

    • Remove the two 17.83 mm black screws located on the handle.

    Editar

  2. Revlon 473 Thermal Cutout Replacement: passo 2, imagem 1 %32

    • Separate the shell from the main component.

    • Check to ensure each piece is free from debris.

    Editar

  3. Revlon 473 Thermal Cutout Replacement: passo 3, imagem 1 %32 Revlon 473 Thermal Cutout Replacement: passo 3, imagem 2 %32 Revlon 473 Thermal Cutout Replacement: passo 3, imagem 3 %32

    • Remove the casing from the heating element.

    • For reassembly, reattach the silver casing before the black cover.

    Editar

  5. Revlon 473 Thermal Cutout Replacement, Thermal Cutout: passo 4, imagem 1 %32

    • Locate the thermal cutout under the coils of the heating element.

    Editar

  6. Revlon 473 Thermal Cutout Replacement: passo 5, imagem 1 %32

    • Test the thermal cutout for continuity using the multimeter.

    • Make sure the multimeter is set to 200 ACV and bring the probes toward the thermal cutout.

    • If the numbers on the multimeter continue to change, the circuit is closed and properly functioning.

    • If the multimeter reads a consistent number, the circuit is opened and the thermal cutout needs to be replaced.

    Editar

  7. Revlon 473 Thermal Cutout Replacement: passo 6, imagem 1 %32

    • To replace the thermal cutout, use the spudgers to extract the object.

    • To remove, wedge it back and forth until it comes free.

    • You do not need to take out the gold piece, only the thermal cutout.

    Editar

  8. Revlon 473 Thermal Cutout Replacement: passo 7, imagem 1 %32

    • Replace the old thermal cutout with a new thermal cutout by snapping it into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Jessica Leyva

Membro desde: 09/18/12

143 Reputação

Autoria de 5 guias

Emblemas: 8

+5 outros emblemas

Equipe

Cal Poly, Team 1-5, Propen Fall 2012 Membro de Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 1,857