Ir para o conteúdo principal

Replacing the Metal Plate Holding the Leg of an Ironing Board

O que você precisa

  1. Replacing the Metal Plate Holding the Leg of an Ironing Board, Metal plate holding the leg of the ironing board: passo 1, imagem 1 %32
    • Place the ironing board face down on a flat, stable surface.

  2. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 2, imagem 1 %32
    • Unscrew and remove the broken metal plate.

  3. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 3, imagem 1 %32
    • Cut the metal sheet into an appropriate size.

    • Use cut proof gloves for protection

  4. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 4, imagem 1 %32
    • Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.

    • Use cut proof gloves for protection

  5. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 5, imagem 1 %32
    • On the corner of a flat edge, use a mallet to shape the metal sheet.

    • Keep your hand at a distance from the mallet to avoid hitting your fingers.

  6. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 6, imagem 1 %32
    • Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.

  7. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 7, imagem 1 %32 Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 7, imagem 2 %32
    • Finish repairing the iron board!

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Nina Youn

Membro desde: 10/26/18

211 Reputação

Autoria de 1 guia

Equipe

UC Davis, Team S2-G1, Bender Fall 2018 Membro de UC Davis, Team S2-G1, Bender Fall 2018

UCD-BENDER-F18S2G1

Membros da 4

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 27

Duração total: 2,833