Introdução

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

Remove the five case screws with a Phillips #00 Screwdriver. Five 3.5mm Phillips Screws Five 3.5mm Phillips Screws
  • Remove the five case screws with a Phillips #00 Screwdriver.

  • Five 3.5mm Phillips Screws

Adicionar comentário

Gently lift up the back cover and set aside.
  • Gently lift up the back cover and set aside.

Adicionar comentário

Use small plastic pry tool to gently remove rear button plate.
  • Use small plastic pry tool to gently remove rear button plate.

  • A heat gun may be used to soften the glue for easier removal.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anthony Giardina

Member since: 19-04-2010

20 reputação

7 Guides authored

Equipe

Cal Poly, Team 7-10, Maness Spring 2010 Membro de Cal Poly, Team 7-10, Maness Spring 2010

CPSU-MANESS-S10S7G10

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 1,326