Introdução

How to replace the speaker.

  1. Slide the battery release latch to the right.
    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

  2. Remove the 7 mm Phillips #0 screws.
    • Remove the 7 mm Phillips #0 screws.

    • Remove the 10 mm Phillips #0 screws.

    • Remove the 14 mm Phillips #0 screw.

  3. Open the flap on the left hand side. Open the flap on the left hand side.
    • Open the flap on the left hand side.

  4. Insert the plastic opening tools between the right and left sides of the latch. Pry the right side  of the latch, and then pry the left side to detach the laptop's cover.
    • Insert the plastic opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

  5. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  6. Open the flap on the right side. Open the flap on the right side.
    • Open the flap on the right side.

  7. Insert the plastic opening tools towards the right side of the latch.
    • Insert the plastic opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

  8. Lift the keyboard slowly. A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.
    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

  9. Use your fingers or a spudger to detach the connector.
    • Use your fingers or a spudger to detach the connector.

  10. Carefully lift and remove the keyboard. Carefully lift and remove the keyboard.
    • Carefully lift and remove the keyboard.

  11. Slowly and carefully lift the speaker with your fingers. The port that the speaker plugs into can be easily removed from the motherboard if not careful! Unplug the speaker with extreme caution!
    • Slowly and carefully lift the speaker with your fingers.

    • The port that the speaker plugs into can be easily removed from the motherboard if not careful! Unplug the speaker with extreme caution!

  12. Use your fingers to unplug the wires from the connector. Use your fingers to unplug the wires from the connector.
    • Use your fingers to unplug the wires from the connector.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Derek Driscoll

Member since: 15-04-2010

119 reputação

8 Guides authored

Equipe

Cal Poly, Team 26-27, Regan Spring 2010 Membro de Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Membros

18 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 1,518