Ir para o conteúdo principal

Replacing Creative Zen X-Fi Button Input Chip Part 1

O que você precisa

  1. Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: passo 1, imagem 1 %32 Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: passo 1, imagem 2 %32 Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: passo 1, imagem 3 %32
    • Using a spudger, wedge the tip between the front and back case to pry them apart.

    • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

  2. Replacing Creative Zen X-Fi Button Input Chip Part 1, Rubber Button Cover: passo 2, imagem 1 %32
    • The black rubber button pad can be removed by simply picking it up.

  3. Replacing Creative Zen X-Fi Button Input Chip Part 1, Button Input Chip Part 1: passo 3, imagem 1 %32
    • Flip the LCD screen off the midsection plate to gain access to the space around the input button chip.

  4. Replacing Creative Zen X-Fi Button Input Chip Part 1, Button Input Chip: passo 4, imagem 1 %32
    • Using a spudger, pry off the button input chip from the mid-section of the device. To gain best leverage, start at the bottom right corner and level your way up the side of the chip.

    • Be aware that the button input chip is glued to the mid-section, so some extra force may be required.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Westley Courchene

Membro desde: 01/13/15

3.362 Reputação

Autoria de 14 guias

Equipe

USF Tampa, Team 1-1, Remmell Fall 2015 Membro de USF Tampa, Team 1-1, Remmell Fall 2015

USFT-REMMELL-F15S1G1

Membros da 5

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 9

Duração total: 317