Ir para o conteúdo principal

Repairing a plastic drill bit for a toy drill

O que você precisa

  1. Repairing a plastic drill bit for a toy drill, Repairing a plastic drill bit for a toy drill: passo 1, imagem 1 %32
    • Match up the broken plastic part and check that the pieces align.

    • The plastic part was hollow and had space to insert the wood support.

  2. Repairing a plastic drill bit for a toy drill: passo 2, imagem 1 %32
    • Tools needed:

    • - Glue (Super glue, Wood Glue or Tacky glue)

    • - A bamboo chopstick from your favorite chinese restaurant

  3. Repairing a plastic drill bit for a toy drill: passo 3, imagem 1 %32
    • Cut the chopstick to the required size using a sharp knife.

    • Some trimming and shaving may be needed depending on the plastic part and the wooden dowel with the objective of to get a tight fit.

  4. Repairing a plastic drill bit for a toy drill: passo 4, imagem 1 %32
    • Apply a drop of glue to the ends of the wooden dowel.

  5. Repairing a plastic drill bit for a toy drill: passo 5, imagem 1 %32
    • Insert the wooden dowel into one part of the broken plastic part.

  6. Repairing a plastic drill bit for a toy drill: passo 6, imagem 1 %32 Repairing a plastic drill bit for a toy drill: passo 6, imagem 2 %32
    • Insert the other end of the wooden dowel into the other end of the plastic toy.

    • Push the ends together to get a tight and clean fit.

Conclusão

To reassemble your device, follow these instructions in reverse order.

claudius

Membro desde: 12/12/10

29 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 5

Duração total: 3,384