Conserte seus objetos Comunidade Loja

Repairing a Panasonic SA-HT810V with the H02/H07 error

Introdução

This guide describes how to fix the H02/H07 error that is common with Panasonic DVD/VCR players.

O que você precisa

  1. Repairing a Panasonic SA-HT810V with the H02/H07 error, Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 1, imagem 1 %32 Repairing a Panasonic SA-HT810V with the H02/H07 error, Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 1, imagem 2 %32 Repairing a Panasonic SA-HT810V with the H02/H07 error, Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 1, imagem 3 %32

    • With the front display of the device facing you, rotate the device 90 degrees counter clockwise.

    • Remove the screw that is on the right side of the panel facing you.

    • Now rotate the device 180 degrees and remove the second screw.

    • Remove all screws with a phillips head screwdriver.

    Editar

  2. Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 2, imagem 1 %32 Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 2, imagem 2 %32

    • Rotate the device so that the back faces you.

    • With a phillips head screwdriver, locate and remove the two screws highlighted by the red circles in image one.

    Editar

  4. Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 3, imagem 1 %32

    • Before removing top cover make sure that the back of the device is facing you.

    • Remove the top cover by bending out on the sides, and pulling the cover towards you while applying upward pressure.

    Editar

  5. Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 4, imagem 1 %32 Repairing a Panasonic SA-HT810V with the H02/H07 error: passo 4, imagem 2 %32

    • Note that the spindle you will be lubing is located underneath the white disk device highlighted in figure one

    • Tilt the device on its front side until you can see underneath the white circular component mentioned in the note above.

    • Locate the spindle circled in figure two and apply one or two drops of 3 in 1 lubricating oil to the spindle.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 5 outros contribuidores

Nathan Cheadle

Membro desde: 04/15/10

161 Reputação

Autoria de 7 guias

Emblemas: 10

+7 outros emblemas

Equipe

Cal Poly, Team 16-5, Maness Spring 2010 Membro de Cal Poly, Team 16-5, Maness Spring 2010

CPSU-MANESS-S10S16G5

Membros da 4

Autoria de 7 guias

3 comentários

Thanks you saved my Christmas and nailed this as my wife loves Christmas music in the background for our family dinner. Thanks again and Merry Christmas

Jerry Wayock - Responder

I have a Panasonic NV-SD235 and I have a tape stuck with the error H02.

Mark Zarraonandia - Responder

Can’t get screws undone on ours… Help!

Matthew - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 7

Últimos 30 dias: 23

Duração total: 27,935