Ir para o conteúdo principal

Repairing Pioneer R1 Speaker Cables

O que você precisa

  1. Repairing Pioneer R1 Speaker Cables, Repairing Pioneer R1 Speaker Cables: passo 1, imagem 1 %32
    • Insert your plastic spudger into the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1. You may further damage the cables connecting the speakers to the motherboard.

  2. Repairing Pioneer R1 Speaker Cables: passo 2, imagem 1 %32
    • Lay the R1 flat like an open book.

    • This will prevent further damage to the cables connecting the speakers to the motherboard.

  3. Repairing Pioneer R1 Speaker Cables: passo 3, imagem 1 %32 Repairing Pioneer R1 Speaker Cables: passo 3, imagem 2 %32
    • Solder the black cable of the left speaker to the nodule marked L+ on the motherboard.

    • Do not allow solder from one nodule to touch another nodule. This will cause the speakers to malfunction.

    • Solder the black cable of the Right speaker to the nodule marked R+ on the motherboard.

    • Solder the red cable of the left speaker to the nodule marked L- on the motherboard.

    • Solder the red cable of the right speaker to the nodule marked R- on the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 141