Introdução

Outline what you are going to teach someone how to do.

Peças

Não são necessárias peças.

  1. Remove 3 screws running along back edge of case cover.
    • Remove 3 screws running along back edge of case cover.

    • Remove 2 screws from each side of case cover.

    Adicionar comentário

  2. Grab edges of cover, pull outward slightly, and pull straight up.
    • Grab edges of cover, pull outward slightly, and pull straight up.

    Adicionar comentário

    • Be sure case cover has been removed prior to back panel removal.

    • Remove 5 screws from panel, as shown.

    Adicionar comentário

    • Use flat-head screwdriver to push in square tabs, located on each side of the back panel.

    • Use caution, the edges are sharp.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kevin

Member since: 26-04-2011

351 reputação

8 Guides authored

Equipe

Cal Poly, Team 18-20, Garner Spring 2011 Membro de Cal Poly, Team 18-20, Garner Spring 2011

CPSU-GARNER-S11S18G20

4 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 18

Todo: 1,991