Introdução

Use this guide to remove the camera's outer case in order to gain access to and repair other parts.

Peças

Não são necessárias peças.

Locate the 2 screws on the bottom of the slider.
  • Locate the 2 screws on the bottom of the slider.

  • Remove both screws with a #00 Phillips screwdriver.

Adicionar comentário

Gently pull on the bottom of the slider until it comes off the lower track.
  • Gently pull on the bottom of the slider until it comes off the lower track.

  • There is a little piece that connects the slider to the track. Be sure not to lose this as it is needed to put the slider back on.

Adicionar comentário

  • Lift the slider up until it comes off the upper track.

Adicionar comentário

  • The slider should now be free from the body of the camera.

Adicionar comentário

  • Locate the 3 screws on the outer metal band and remove them with a #00 Phillips screwdriver.

Adicionar comentário

  • Use the spudger to peel off the outer metal band, starting from the bottom of the camera.

  • The metal band it attached to the camera with glue in addition to screws. Be careful not to bend the band when removing it from the camera.

Adicionar comentário

  • The shutter button can now be removed. It is not connected to the camera and can be lifted off.

Adicionar comentário

  • Remove the memory card.

  • Locate and remove the 2 screws using a #00 Phillips screwdriver.

Adicionar comentário

  • Use a spudger around the edge of the case to loosen it.

  • Carefully wiggle the back case off. This may require a fair amount of force.

Adicionar comentário

  • Locate the 3 internal screws holding on the front of the case. Remove them with a #00 Phillips screwdriver.

Adicionar comentário

  • While grasping the interior and the front case, gently pull until they start to come apart. Some light wiggling may be required.

  • Be careful not to completely pull the front case off because it will still be connected with wires.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jared Ruekberg

Member since: 15-04-2010

24 reputação

2 Guides authored

Equipe

Cal Poly, Team 6-13, Maness Spring 2010 Membro de Cal Poly, Team 6-13, Maness Spring 2010

CPSU-MANESS-S10S6G13

5 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 2,065