Conserte seus objetos Comunidade Loja

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

Introdução

These instructions tell you how to extract the brewing unit.

O que você precisa

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5 opening procedure: passo 1, imagem 1 %32

    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

    Traduzir

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 2, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 2, imagem 2 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 2, imagem 3 %32

    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

    Traduzir

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 3, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 3, imagem 2 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar

    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

    Traduzir

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 4, imagem 1 %32

    • Also remove the two oval head screws underneath the ground coffee compartment lid.

    Traduzir

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 5, imagem 1 %32

    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

    Traduzir

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 6, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 6, imagem 2 %32

    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

    Traduzir

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 7, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 7, imagem 2 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 7, imagem 3 %32

    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

    Traduzir

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 8, imagem 1 %32

    • Remove the Torx T15 screw on the side panel with the water tank.

    Traduzir

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 9, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 9, imagem 2 %32

    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

    Traduzir

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 10, imagem 1 %32

    • Pull the left side panel slightly towards the back and remove it.

    Traduzir

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 11, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 11, imagem 2 %32

    • The brewing unit is on the left side of the machine.

    Traduzir

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 12, imagem 1 %32 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 12, imagem 2 %32

    • The cover over the brewing unit is only lightly gripped. Lift it out.

    Traduzir

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 13, imagem 1 %32

    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

    Traduzir

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 14, imagem 1 %32

    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

    Traduzir

  16. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): passo 15, imagem 1 %32

    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

    Traduzir
Conclusão

Work your way through the instructions in reverse to re-assemble the device.

Uma outra pessoa concluiu este guia.

Um agradecimento especial a esses tradutores:

de en

100%

jana°

VauWeh

Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

VauWeh

Membro desde: 10/19/15

202.869 Reputação

Autoria de 246 guias

Emblemas: 44

+41 outros emblemas

Equipe

Repair is War on Entropy Membro de Repair is War on Entropy

Community

Membros da 25

Autoria de 1.110 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 12

Últimos 30 dias: 67

Duração total: 4,671