Pular para o conteúdo principal

Introdução

This guide will focus on removing the back cover of the upper part of the phone. This will allow the user to access many of the other parts of the phone, including the motherboard, the keypad, the antenna, and the speaker.

Peças

Nenhum componente especificado.

  1. Orient the phone so that the phone model and other descriptive information is facing upward. Locate the two silver screws near the hinge where the battery is housed.
    • Orient the phone so that the phone model and other descriptive information is facing upward.

    • Locate the two silver screws near the hinge where the battery is housed.

    • Remove the silver screws using a Phillips head #2 screwdriver.

  2. Pull off the back panel of the phone. Make sure you pull the cover off carefully in order to prevent damage to the back cover. Make sure you pull the cover off carefully in order to prevent damage to the back cover.
    • Pull off the back panel of the phone.

    • Make sure you pull the cover off carefully in order to prevent damage to the back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Elizabeth Kelly

Membro desde: 22-10-2012

501 reputação

5 Guias de autoria

Equipe

Clemson, Team 15-1, Benson Fall 2012 Membro de Clemson, Team 15-1, Benson Fall 2012

CLEM-BENSON-F12S15G1

4 Membros

10 Guias de autoria

Help I am still struggling to get the back cover off

caroline williams - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 41

Todo: 1,587