Peças

Não são necessárias peças.

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    Adicionar comentário

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    Adicionar comentário

    • Unscrew the 3 screws in the back.

    Adicionar comentário

    • Pull the outer case upward and then towards you.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    Adicionar comentário

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    Adicionar comentário

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    Adicionar comentário

    • Remove the three screws holding in the DVD tray

    Adicionar comentário

    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

    Adicionar comentário

    • Gently lift the DVD tray off of the motherboard.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Domingue

Member since: 28-01-2011

398 reputação

3 Guides authored

Equipe

Cal Poly, Team 3-30, Regan Winter 2011 Membro de Cal Poly, Team 3-30, Regan Winter 2011

CPSU-REGAN-W11S3G30

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 12

Todo: 1,600