Removing Playstation 2 Slimline SCPH-7500x Outer Shell - Guia de Reparo iFixit

Introdução

This guide will walk you through step-by-step on how to properly remove and replace the outer shell in the PlayStation 2 Slimline.

O que você precisa

Passo 1 Removing Playstation 2 Slimline SCPH-7500x Outer Shell

Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.

Passo 2

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 2, imagem 1 %32

Locate the six feet on the bottom of the PS2.
Five of these feet are in plain sight while the last foot is located under the black void sticker on the back of the device.
Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or the screw should be in plain sight.

Passo 3

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 3, imagem 1 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 3, imagem 2 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 3, imagem 3 %32

Remove the five visible feet from the bottom of the device using a spudger.

Passo 4

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 4, imagem 1 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 4, imagem 2 %32

Remove the sticker and then remove the 6th foot.

Passo 5

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 5, imagem 1 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 5, imagem 2 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 5, imagem 3 %32

After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

Passo 6

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 6, imagem 1 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 6, imagem 2 %32

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 6, imagem 3 %32

Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.
You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.

Passo 7

Removing Playstation 2 Slimline SCPH-7500x Outer Shell: passo 7, imagem 1 %32

If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

Conclusão

To reassemble your device, follow these instructions in reverse order.

9 outras pessoas executaram este guia.

Autor(a)

com 20 outros contribuidores

Jared Hirata

Membro desde: 04/09/13

880 Reputação

Autoria de 7 guias

+9 outros emblemas

Equipe

Cal Poly, Team 17-4, Regan Spring 2013 Membro de Cal Poly, Team 17-4, Regan Spring 2013

CPSU-REGAN-S13S17G4

Membros da 3

Autoria de 28 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 2,532