Introdução

The screen of the Nokia 3100b is prone to cracking. This guide shows you how to access the screen and remove it.

Peças

Não são necessárias peças.

  1. Make sure your phone is turned off.
    • Make sure your phone is turned off.

    Adicionar comentário

  2. Press the button on the back of the phone and slide the back panel off.
    • Press the button on the back of the phone and slide the back panel off.

    • Remove the battery by pulling it from the phone.

    Adicionar comentário

    • Note the small metal frame that hold the SIM card into place.

    • Gently pull back the tab and lift open the frame.

    Adicionar comentário

    • Retrieve your SIM card.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Separate the front cover from the main body of the phone.

    • Set the front cover, as indicated, aside.

    Adicionar comentário

    • Remove the screws on the phone in the order of the colors of the rainbow (Red, Orange, Yellow, Green, Blue, Purple) with a Torx T6 screwdriver.

    • Removing the screws in this order prevents any unnecessary torsion on the circuit board. Be sure to remove the screws in the order indicated.

    Adicionar comentário

    • Pull the screen assembly from the base of the phone.

    • Set the base of the phone, as indicated, aside.

    Adicionar comentário

    • Carefully lift the keypad portion of the screen assembly from the circuit board.

    Adicionar comentário

    • Separate the screen from the circuit board.

    • Note the components circled in orange. These will need to be reconnected during reassembly in order for the screen to function.

    • Set the circuit board, as indicated, aside.

    • Remember to reconnect the screen to the circuit board when reassembling!

    Adicionar comentário

    • Gently push down on the screen to pop it off of the assembly.

    Adicionar comentário

    • When the screen falls out the assembly, two white tabs will fall out with it.

    • When reinstalling the screen, insert the tabs with the slanted side pointing upwards so they slide into the assembly.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sterling Fuentes

Member since: 09-04-2010

61 reputação

8 Guides authored

Equipe

Cal Poly, Team 29-64, Johann Spring 2010 Membro de Cal Poly, Team 29-64, Johann Spring 2010

CPSU-JOHANN-S10S29G64

3 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,607