Ir para o conteúdo principal

Introdução

This is a very simple task, only requiring a screwdriver.

Peças

Nenhum componente especificado.

  1. Lift up the winding lever and rotate it clockwise to open the back film compartment. Lift up the winding lever and rotate it clockwise to open the back film compartment.
    • Lift up the winding lever and rotate it clockwise to open the back film compartment.

  2. Lift up the winding handle and remove one 3.85mm screw. Remove the film winding handle.
    • Lift up the winding handle and remove one 3.85mm screw.

    • Remove the film winding handle.

  3. Pull the film winder down until it comes free. Do not close the film compartment. The compartment will not open without the film winding lever installed properly.
    • Pull the film winder down until it comes free.

    • Do not close the film compartment. The compartment will not open without the film winding lever installed properly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nick

Membro desde: 19-04-2011

435 Reputation

4 Guias de autoria

Team

Cal Poly, Team 8-7, Regan Spring 2011 Membro de Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 Membros

4 Guias de autoria

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 41

All Time: 10,589