Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Removing Magellan RoadMate 1200 Back Cover

O que você precisa

  1. Removing Magellan RoadMate 1200 Back Cover, Back Cover: passo 1, imagem 1 %32 Removing Magellan RoadMate 1200 Back Cover, Back Cover: passo 1, imagem 2 %32
    • Remove 4 rubber caps covering each screw by inserting the screwdriver into the side of cap and prying back and forth.

    • Please note: this is a tedious process, but be patient.

  2. Removing Magellan RoadMate 1200 Back Cover: passo 2, imagem 1 %32
    • Remove the 4 screws holding the cover in place using a Phillips #00 screwdriver.

  3. Removing Magellan RoadMate 1200 Back Cover: passo 3, imagem 1 %32 Removing Magellan RoadMate 1200 Back Cover: passo 3, imagem 2 %32
    • Open the back cover.

    • Lift the cover slowly and carefully; the speaker is screwed on the back cover and is connected to the circuit board.

  4. Removing Magellan RoadMate 1200 Back Cover: passo 4, imagem 1 %32 Removing Magellan RoadMate 1200 Back Cover: passo 4, imagem 2 %32
    • Disconnect the speaker from the terminal.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Ross Light

Membro desde: 04/12/10

217 Reputação

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 3,467