Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

After you remove the back cover, you can get to any part of your RoadMate.

Peças

Nenhum componente especificado.

  1. Remove the four rubber caps from the back by using the Philips #00 screwdriver to pull them from the back. Remove the four rubber caps from the back by using the Philips #00 screwdriver to pull them from the back.
    • Remove the four rubber caps from the back by using the Philips #00 screwdriver to pull them from the back.

  2. Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.
    • Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.

  3. Remove the back cover from the device by separating the back cover along its seam. Slowly lift the cover, the speaker is screwed onto the back cover and is connected onto the circuit board.
    • Remove the back cover from the device by separating the back cover along its seam.

    • Slowly lift the cover, the speaker is screwed onto the back cover and is connected onto the circuit board.

  4. Pull the speaker cord, horizontally, by its base, away from the motherboard. When reassembling, make sure that you plug the terminal in the same way.  The black wire should be on the side farthest from the battery.
    • Pull the speaker cord, horizontally, by its base, away from the motherboard.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Ross Light

Membro desde: 12-04-2010

175 Reputation

6 Guias de autoria

Adicione um comentário

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 3,314