Introdução

Need to get inside the amp? Remove the back panel!

  1. Be sure to unplug the device before proceeding.
    • Be sure to unplug the device before proceeding.

    • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.
    • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

  4. Once the top is separated, use your hand to remove the back panel from the unit.
    • Once the top is separated, use your hand to remove the back panel from the unit.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Greg Sawers

Member since: 27-09-2012

79 reputação

3 Guides authored

Equipe

Cal Poly, Team 24-30, Regan Fall 2012 Membro de Cal Poly, Team 24-30, Regan Fall 2012

CPSU-REGAN-F12S24G30

5 Membros

7 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 46

Todo: 4,108