Introdução

This guide will show how to remove the back cover.

Peças

Não são necessárias peças.

Remove the six external screws from the camera using a Phillips #0 screwdriver.
  • Remove the six external screws from the camera using a Phillips #0 screwdriver.

  • After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.

  • Be careful, make sure you don't lose the screws.

Adicionar comentário

Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.
  • Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

Adicionar comentário

  • Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

Adicionar comentário

  • Carefully squeeze the top right corner of the camera and pry off the external cover.

  • If you hear a "cracking" sound. This is normal.

  • Continue to pull the external cover and it will come off cleanly.

  • Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

Adicionar comentário

  • Carefully pull off the back cover, parts behind the back of the case might fall out.

Adicionar comentário

Linha de Chegada

2 outras pessoas concluíram este guia.

Hasit

Member since: 15-04-2010

183 reputação

2 Guides authored

Equipe

Cal Poly, Team 6-17, Maness Spring 2010 Membro de Cal Poly, Team 6-17, Maness Spring 2010

CPSU-MANESS-S10S6G17

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 4

Todo: 3,309