Peças

Não são necessárias peças.

  1. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the back of the camera, may require force.
    • Remove the back of the camera, may require force.

  3. Unscrew the right metal bracket of the viewing lens
    • Unscrew the right metal bracket of the viewing lens

  4. Unscrew the top right corner screw
    • Unscrew the top right corner screw

  5. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  6. Unscrew the bottom right corner screw.
    • Unscrew the bottom right corner screw.

  7. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  8. Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
    • Pull the front of the camera off of the mother board.

  9. Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.
    • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

  10. Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.
    • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

  11. Pull out the red wire and white wire attaching the screen to the motherboard.
    • Pull out the red wire and white wire attaching the screen to the motherboard.

  12. Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.
    • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Melissa

Member since: 12-02-2013

240 reputação

2 Guides authored

Equipe

Ohio State, Team 1-2, Buehl Spring 2013 Membro de Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Membros

5 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 141