Introdução

Remove the main fan from the case.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Adicionar comentário

Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
  • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

  • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

Adicionar comentário

Remove the power cable from the fan and detach bracing.
  • Remove the power cable from the fan and detach bracing.

Adicionar comentário

Linha de Chegada

2 outras pessoas concluíram este guia.

Justin Petrilli

Member since: 21-01-2010

2.598 reputação

11 Guides authored

Equipe

Cal Poly, Team 13-24, Maness Winter 2010 Membro de Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Membros

13 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 4,811