Conserte seus objetos Comunidade Loja

Remington S5500 Power Supply Cable Removal

Introdução

Two tools required for the completion of this task include a PH1 screwdriver, and a prying tool.

All screws on this device are 10mm (0.393 in).

O que você precisa

  1. Remington S5500 Power Supply Cable Removal, Power Supply Cable: passo 1, imagem 1 %32 Remington S5500 Power Supply Cable Removal, Power Supply Cable: passo 1, imagem 2 %32

    • Place the prying tool in between the hair straightener and the aligning cap.

    • Push forwards on the prying tool to pop off the aligning cap.

    Editar

  2. Remington S5500 Power Supply Cable Removal: passo 2, imagem 1 %32 Remington S5500 Power Supply Cable Removal: passo 2, imagem 2 %32 Remington S5500 Power Supply Cable Removal: passo 2, imagem 3 %32

    • Remove the screws with the Phillips #1 screwdriver located underneath the aligning cap, one on each side of the straightener.

    • Use the prying tool to remove the aligning rods after the removal of the screws.

    • Gently separate each half of the hair straightener.

    • The spring located in the middle of this mechanism may pop out and can get lost very easily. Try to separate the two components slowly.

    Editar

  4. Remington S5500 Power Supply Cable Removal: passo 3, imagem 1 %32 Remington S5500 Power Supply Cable Removal: passo 3, imagem 2 %32

    • After the hair straightener is separated, use a Phillips #1 screwdriver to remove the two screws located on the lower half of the straightener.

    • Use the prying tool to remove the hinge cover.

    Editar

  5. Remington S5500 Power Supply Cable Removal: passo 4, imagem 1 %32 Remington S5500 Power Supply Cable Removal: passo 4, imagem 2 %32

    • Pull upwards while pulling outwards to disconnect the wire from the housing.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 1 outro contribuidor

Benjamin Yohe

Membro desde: 07/11/18

303 Reputação

Autoria de 2 guias

Emblemas: 8

+5 outros emblemas

Equipe

IUPUI, Team S3-G3, Wilson Summer 2018 Membro de IUPUI, Team S3-G3, Wilson Summer 2018

IUPUI-WILSON-SU18S3G3

Membros da 5

Autoria de 2 guias

6 comentários

Excelente trabajo! Muchas gracias por la información!

Ronnetto - Responder

is there a place where you can buy and replace the power cable, or the plug ?

alexandru popa - Responder

the slip ring plug that is ..

alexandru popa -

Hello,

from where did you get the spare power cord ?

Kes - Responder

part number would be helpful?

Steven Lamprell - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 12

Últimos 30 dias: 86

Duração total: 6,620