Ir para o conteúdo principal

RedOctane X-Plorer Strum Bar Replacement

O que você precisa

  1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: passo 1, imagem 1 %32 RedOctane X-Plorer Strum Bar Replacement, Rear Case: passo 1, imagem 2 %32
    • Remove the strap by pulling it off of the mounts located on the body and neck.

  2. RedOctane X-Plorer Strum Bar Replacement: passo 2, imagem 1 %32 RedOctane X-Plorer Strum Bar Replacement: passo 2, imagem 2 %32 RedOctane X-Plorer Strum Bar Replacement: passo 2, imagem 3 %32
    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

  3. RedOctane X-Plorer Strum Bar Replacement: passo 3, imagem 1 %32 RedOctane X-Plorer Strum Bar Replacement: passo 3, imagem 2 %32 RedOctane X-Plorer Strum Bar Replacement: passo 3, imagem 3 %32
    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

  4. RedOctane X-Plorer Strum Bar Replacement, Strum Bar: passo 4, imagem 1 %32
    • Using two hands, gently remove the two string rod fixtures.

  5. RedOctane X-Plorer Strum Bar Replacement: passo 5, imagem 1 %32
    • Lift up on the strum bar to remove it from the guitar.

  6. RedOctane X-Plorer Strum Bar Replacement: passo 6, imagem 1 %32 RedOctane X-Plorer Strum Bar Replacement: passo 6, imagem 2 %32
    • Remove the string rod by gently pulling it out of the strum bar.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Jared McMullen

Membro desde: 04/18/18

276 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S17-G1, Livingston Spring 2018 Membro de Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

Membros da 3

Autoria de 9 guias

2 comentários

I had a squeaking strum bar so I followed this guide to dismantle and clean the parts. Other than the one step missed in the guide it was easy to follow. It also stopped the squeaking!

Zachary Avery - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 42

Duração total: 3,522