Conserte seus objetos Comunidade Loja

RedOctane X-Plorer Pedal Input Replacement

Introdução

The RJ-14 connector is designed to connect to pedals that do not come with the device. This guide will show you how to replace the RJ-14 connector located at the bottom of the guitar.

O que você precisa

  1. RedOctane X-Plorer Pedal Input Replacement, Rear Case: passo 1, imagem 1 %32 RedOctane X-Plorer Pedal Input Replacement, Rear Case: passo 1, imagem 2 %32

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Editar

  2. RedOctane X-Plorer Pedal Input Replacement: passo 2, imagem 1 %32 RedOctane X-Plorer Pedal Input Replacement: passo 2, imagem 2 %32 RedOctane X-Plorer Pedal Input Replacement: passo 2, imagem 3 %32

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Editar

  4. RedOctane X-Plorer Pedal Input Replacement: passo 3, imagem 1 %32 RedOctane X-Plorer Pedal Input Replacement: passo 3, imagem 2 %32 RedOctane X-Plorer Pedal Input Replacement: passo 3, imagem 3 %32

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Editar

  5. RedOctane X-Plorer Pedal Input Replacement, RJ-14 Connector: passo 4, imagem 1 %32 RedOctane X-Plorer Pedal Input Replacement, RJ-14 Connector: passo 4, imagem 2 %32 RedOctane X-Plorer Pedal Input Replacement, RJ-14 Connector: passo 4, imagem 3 %32

    • Remove the two 10mm Phillips #1 screws from the RJ-14 connector board.

    • Lift the RJ-14 connector to remove it from the case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Riley

Membro desde: 04/18/18

649 Reputação

Autoria de 7 guias

Emblemas: 9

+6 outros emblemas

Equipe

Cal Poly, Team S17-G1, Livingston Spring 2018 Membro de Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

Membros da 3

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 17

Duração total: 912