Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Unscrew all visible screws on the black logic board cover.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
-
Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.