Conserte seus objetos Comunidade Loja

Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Introdução

The anti-slip pads are built in to stop your feet from slipping off the Hovertrax board and losing control of the wheel motors.

O que você precisa

  1. Razor Hovertrax 2.0 Anti-Slip Pads Replacement, Anti-Slip Pads: passo 1, imagem 1 %32

    • Choose an area to access and slip the Jimmy blade to pry open the pad.

    • We recommend prying the pad open from the top and bottom instead of the sides due to the plastic wheel cover blocking the access point.

    Editar

  3. Razor Hovertrax 2.0 Anti-Slip Pads Replacement: passo 2, imagem 1 %32

    • After using the Jimmy tool to open up the area, use your hands and slowly peel off the adhesive from the pad and board.

    • You may be required to remove the remaining adhesive on the board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 23