Conserte seus objetos Comunidade Loja

Razer Huntsman Tournament Edition Port Replacement

Introdução

If your port is either wobbly or non-functional, use this guide to replace it. This guide should take a half hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

O que você precisa

  1. Razer Huntsman Tournament Edition Port Replacement, Keycaps: passo 1, imagem 1 %32

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    Editar

  2. Razer Huntsman Tournament Edition Port Replacement: passo 2, imagem 1 %32 Razer Huntsman Tournament Edition Port Replacement: passo 2, imagem 2 %32

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    Editar

  3. Razer Huntsman Tournament Edition Port Replacement: passo 3, imagem 1 %32 Razer Huntsman Tournament Edition Port Replacement: passo 3, imagem 2 %32 Razer Huntsman Tournament Edition Port Replacement: passo 3, imagem 3 %32

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    Editar

  4. Razer Huntsman Tournament Edition Port Replacement, Chassis: passo 4, imagem 1 %32

    • Remove all of the keycaps with a keycap puller.

    Editar

  6. Razer Huntsman Tournament Edition Port Replacement: passo 5, imagem 1 %32 Razer Huntsman Tournament Edition Port Replacement: passo 5, imagem 2 %32

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    Editar

  7. Razer Huntsman Tournament Edition Port Replacement: passo 6, imagem 1 %32

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    Editar

  8. Razer Huntsman Tournament Edition Port Replacement: passo 7, imagem 1 %32

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    Editar

  9. Razer Huntsman Tournament Edition Port Replacement: passo 8, imagem 1 %32

    • Disconnect the internal cable.

    Editar

  10. Razer Huntsman Tournament Edition Port Replacement, Port: passo 9, imagem 1 %32 Razer Huntsman Tournament Edition Port Replacement, Port: passo 9, imagem 2 %32

    • Unscrew the board with the port.

    • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

    • Move the cable out of the way for the second screw

    Editar

  11. Razer Huntsman Tournament Edition Port Replacement: passo 10, imagem 1 %32

    • Detach the internal cable from the USB board.

    • Do this carefully.

    Editar

  12. Razer Huntsman Tournament Edition Port Replacement: passo 11, imagem 1 %32

    • Remove the USB board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 2 outros contribuidores

Joseph O'Dowd

Membro desde: 10/25/22

383 Reputação

Autoria de 3 guias

Emblemas: 9

+6 outros emblemas

Equipe

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 Membro de UMass Dartmouth, Team 4-3, Sinclaire Fall 2022

UMASSD-SINCLAIRE-F22S4G3

Membros da 5

Autoria de 7 guias

Um comentário

how do i get a new port and where

Guardian Suit - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 4

Últimos 30 dias: 26

Duração total: 324