Ir para o conteúdo principal

Razer DeathAdder Chroma Scroll Wheel Replacement

O que você precisa

  1. Razer DeathAdder Chroma Scroll Wheel Replacement, Outer Casing: passo 1, imagem 1 %32
    • Opening the mouse casing will void any warranty that exists for the mouse.

    • Turn the mouse over so the bottom is facing up.

  2. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 2, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 2, imagem 2 %32
    • Use the blunt end of the spudger to pry the adhesive rubber pads from the top left and right edges.

  3. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 3, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 3, imagem 2 %32
    • Use a Phillips #0 screwdriver to remove two 6.7 mm screws.

  4. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 4, imagem 1 %32
    • Use your fingers to identify the location of the screw under the bottom label.

  5. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 5, imagem 1 %32
    • Use a Phillips #0 screwdriver to remove one 6.7 mm screw.

    • Clear the label away from around the screw for easier removal.

  6. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 6, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 6, imagem 2 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 6, imagem 3 %32
    • Turn the mouse over so the bottom is facing down.

    • Separate the top casing from the bottom base by pulling the top casing upwards.

    • Separating the casing too quickly could damage the ribbon connector between the motherboard and the LED lights.

  7. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 7, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 7, imagem 2 %32
    • Disconnect the ribbon connector between the motherboard and the LED lights by pulling upward.

    • Pulling too hard could damage the wire connections.

  8. Razer DeathAdder Chroma Scroll Wheel Replacement, Motherboard: passo 8, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement, Motherboard: passo 8, imagem 2 %32
    • Disconnect the ribbon connector between the motherboard and the USB cable by pulling upward.

  9. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 9, imagem 1 %32
    • Use a Phillips #0 screwdriver to remove three 5.5 mm screws.

  10. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 10, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 10, imagem 2 %32
    • Use a Phillips #0 screwdriver to remove two 11.5 mm screws on the side buttons.

  11. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 11, imagem 1 %32
    • Use a Phillips #000 screwdriver to remove one 5.0 mm screw.

  12. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 12, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 12, imagem 2 %32
    • Disconnect the ribbon connector between the motherboard and the optical sensor.

  13. Razer DeathAdder Chroma Scroll Wheel Replacement: passo 13, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement: passo 13, imagem 2 %32
    • Remove the motherboard by grasping the sides and gently pulling upward.

  14. Razer DeathAdder Chroma Scroll Wheel Replacement, Scroll Wheel: passo 14, imagem 1 %32 Razer DeathAdder Chroma Scroll Wheel Replacement, Scroll Wheel: passo 14, imagem 2 %32
    • Remove the scroll wheel from the socket by pulling to the right.

    • Pulling too hard could damage the scroll wheel connector.

Conclusão

To reassemble your device, follow these instructions in reverse order.

11 outras pessoas executaram este guia.

Corrie Tung

Membro desde: 03/24/17

702 Reputação

Autoria de 2 guias

Equipe

Baylor, Team S5-G2, Williams Spring 2017 Membro de Baylor, Team S5-G2, Williams Spring 2017

BU-WILLIAMS-S17S5G2

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 21

Últimos 30 dias: 85

Duração total: 18,686